rss icon Subscribe
desktop mobile

Hempel Launches Hempaguard MaX Coatings

Photo: Hempel

Posted by Michelle Howard

Global coatings manufacturer Hempel has launched an innovative new fouling defense system - Hempaguard MaX.

This unique three-coat system provides vessels with a smoother hull. It reduces drag and results in significantly lower fuel requirements, and will deliver a guaranteed maximum speed loss* of 1.2 percent over five years.

The Hempaguard MaX system is applied in just three layers, meaning it can be applied more quickly, reducing time in dry dock by up to two days. The combined savings generated by Hempaguard MaX through reduced time in dry dock and increased fuel savings could payback the cost of the coating within three months**. With these exceptional out of dock fuel savings and full operational flexibility - Hempaguard MaX maximizes efficiency and reduces operational costs.

Speaking at today's launch in London, Hempel's Head of Marine Group Product Management, Davide Ippolito, said: "The high level of fuel savings and hull protection are achieved due to the low average hull roughness (AHR) level delivered by the whole coating system, very low speed loss over the entire operational period and improved anticorrosive capabilities."

"Hempaguard MaX is the next logical step for shipowners and operators seeking to maximize their efficiency and reduce associated CO2 emissions. At a time where marginal gains are of importance and environmental regulations are becoming stricter, the choice of hull coating can make a significant difference."

About the three-coat system technology
Hempel's new system builds on the overwhelming success of its flagship hull coating Hempaguard X7. Since its launch in 2013, this coating has been applied to over 1500 vessels allowing those owners to collectively reduce their annual bunker bill by a staggering USD 500 million and over 10 million tonnes in CO2 emissions.

The strength of Hempaguard MaX is its ability to successfully exploit the synergies between its three different layers: Hempaprime Immerse 900, tie-coat Nexus II, and Hempaguard X8.

The top coat Hempaguard X8, driving the exceptional antifouling performance, is built on Hempel's enhanced patented Actiguard technology. This unique coating combines the smoothness of a silicone coating with an improved hydrogel microlayer and active ingredient to provide outstanding antifouling performance, full operational flexibility and smooth hull.

Hempaprime Immerse 900 and Nexus II contribute significantly to Hempaguard MaX's low AHR. A smoother hull delivers less drag and improved fuel efficiency from day one.

Hempaprime Immerse 900 is an anticorrosive primer that can be applied in one coat, while Nexus II is a next generation tie-coat technology with improved anticorrosive capabilities. Together, they provide the same protection delivered by two standard maintenance epoxy coats, reduce time in the dock for faster return to service and ultimately save money for the shipowner and operators.

The new three-coat Hempaguard MaX system used together with SHAPE, Hempel's System for Hull and Propeller Efficiency, is now the new peak for fuel efficiency available to commercial shipowners and operators.

Hempaguard MaX at a glance:

  • Powerful advanced fouling defense coating system with increased smoothness
  • Low Average Hull Roughness (AHR) driven by the whole coating system - improving fuel efficiency
  • 1.2 per cent maximum guaranteed speed loss* over five years
  • Enhanced anti-corrosive capabilities
  • Three coat system that saves up to two days in dock - saving time and money.
  • Improved idle time antifouling guarantee of 120 days


Actiguard Technology:
A ground-breaking technology that integrates, in a single coating, silicone-hydrogel and great control of biocide diffusion.

(*) Speed loss: If a vessel's main engine is set at a certain power output, it will propel the ship through the water at a certain speed. Over time, fouling accumulation will increase drag and cause the speed of the ship to reduce even if the main engine power output remains constant. This reduction in speed is termed "speed loss".

(**) Based on a VLCC with activity level of 70 per cent and burning low sulphur fuel costing 35 per cent more than standard bunker fuel over a five-year life cycle. Hempaguard MaX system delivers an annual saving of around USD 1.8 million compared to a market average antifouling. This equates to a ROI (return on investment) of three months.




Sep 5, 2019

 

Technology

Vesper Marine Announces Cortex

Image: Vesper Marine

Vesper Marine, a manufacturer of innovative marine electronics, announced the release of Cortex

Bibby Taps Real-time Wave Data

Bibby WaveMaster 1 (Photo: MIROS)

For Bibby Marine Services, MIROS WaveFinder software supports operations in real time and provides

NYK Conducts Japan’s First Carbon-Neutral Voyage

Aries Leader (Photo: NYK Line)

NYK has become the first Japanese shipping company to realize a carbon-neutral voyage by

Coatings & Corrosion

Marine Coatings Market: Clean, Green & $9.3B by 2025

Frost  & Sullivan said shipbuilders and dry-docking companies should work with marine coatings specialists to ensure that high-performance, environmentally-sustainable marine coatings that can protect the environment and increase fuel efficiencies are developed for use in the maritime sector.
Photo: © helenedevun/Adobe Stock

In its latest analysis of the marine coatings sector, UK-headquartered market analyst Frost &

Polymer Pioneer Wins Sperry Award

Thomson onboard the Canadian Coast Guard Ship Hudson with SeaThigor mechanical face seal installed.

 (Photo: Thordon Bearings)

Thordon Bearings’ founder and polymer materials pioneer George A. (Sandy) Thomson has been awarded

AkzoNobel to Coat Chinese Icebreaker

Image: Akzo Nobel N.V.

Dutch multinational company AkzoNobel‘s coatings solution selected by Polar Research Institute of

Maritime Apps